At Mays Motorcycle Maintenance, we provide a full spectrum of services that balance routine reliability with high-level technical precision. Our goal is to ensure your bike performs exactly how the engineers intended, or better.
Don't let your bike deteriorate while it sits. Whether you're tucking it in for the winter or pulling it out for the first ride of the year, we ensure your fuel system, battery, and tires are ready for the transition.
Fuel System Stabilization: Treating the tank to prevent ethanol phase separation and "gumming" of injectors or carbs.
Battery Maintenance: Deep charging and lead-acid fluid check; installation of a battery tender lead if needed.
Cylinder Fogging: (For long-term storage) Protecting internal engine walls from moisture and corrosion.
Tire Prep: Over-inflating to prevent flat-spots and treating sidewalls.
Fresh Fuel Flush: Draining any stale fuel and running a system cleaner.
Safety Nut-and-Bolt Check: Inspecting all critical fasteners that may have loosened from vibration or temperature swings.
Full Systems Test: Verifying lights, signals, and tire pressures before your first outing.
Beyond the fluids, your motorcycle relies on several "consumable" components that degrade with every mile. Our Wear Item Service restores your bike’s stopping power, breathing, and handling by replacing aging components with OEM or high-performance upgrades.
Brake Pad Replacement: Installation of new sintered or semi-metallic pads to restore bite and eliminate squealing.
Rotor Inspection: We check for thinning, warping, or "bluing" to ensure your new pads have a perfect mating surface.
Hardware Lubrication: Cleaning and greasing of caliper slide pins to prevent uneven wear or "stuck" brakes.
Air Filter Service: Replacement of clogged paper filters or cleaning/oiling of reusable filters (like K&N). A clean filter improves throttle response and fuel economy.
Spark Plug Replacement: Installation of fresh iridium or standard plugs to ensure crisp ignition and prevent misfires.
Drive Chain & Sprockets: Comprehensive cleaning, tension adjustment, and lubrication. If the chain is stretched or sprockets are "hooked," we provide full kit replacement.
Control Cables: Inspection and lubrication of throttle and clutch cables to ensure a smooth, "butter-like" feel and prevent snapping.
Battery Health Test: A load test of your battery and cleaning of terminal corrosion to ensure reliable starting.
Ignoring wear items doesn't just hurt performance, it leads to expensive "collateral damage." For example, worn brake pads can ruin expensive rotors, and a dirty air filter can cause your engine to run "rich," fouling your new spark plugs. We catch these items before they become a headache.
Your connection to the road depends entirely on the health of your wheels. From precision tire mounting to the hidden bearings that keep you rolling smoothly, we ensure your bike’s footprint is safe, balanced, and vibration-free.
Mount & Balance: Professional installation of street, track, or off-road tires using non-marring equipment to protect your rims.
Electronic Balancing: We eliminate high-speed wobbles and vibrations using precision weights for a butter-smooth ride.
Valve Stem Replacement: Installation of new rubber or leak-proof 90-degree aluminum stems for easier pressure checks.
Wheel Bearing Replacement: If you feel a "crunch" or play in your wheels, we press in high-quality sealed bearings to restore stability.
Steering Head Bearings: We diagnose and fix "notchy" steering or head-shake by cleaning, packing, or replacing your neck bearings.
Swingarm & Linkage Service: Essential for handling; we grease or replace pivot bearings to ensure your suspension moves freely.
Spoke Tensioning & Truing: For laced wheels, we check for loose spokes and "out-of-round" rims to prevent tube punctures and wobbles.
Brake Rotor & ABS Ring Inspection: Ensuring your stopping surfaces and speed sensors are clean and perfectly aligned during wheel re-installation.
Axle & Spacer Service: We clean and coat axles with anti-seize/grease to prevent galling and ensure easy future maintenance.
Tires are the most critical safety component on your motorcycle. A tire that is "squared off" or bearings that have even a millimeter of play can drastically compromise your cornering confidence. We don’t just "swap tires", we inspect the entire rotating assembly.
Every motorcycle has a "Major Service" interval (usually every 15k–25k miles). This service is the difference between a bike that lasts 30,000 miles and one that lasts 100,000 miles.
Valve Clearance Inspection & Adjustment: We check the internal tolerances of your valvetrain to ensure optimal power and prevent engine damage.
Throttle Body/Carburetor Sync: We use vacuum gauges to ensure all cylinders are working in perfect harmony, eliminating "buzz" and improving idle.
Coolant System Flush: Draining old, acidic coolant and replacing it with fresh engine ice or OEM coolant to prevent overheating and internal scaling.
Compression/Leakdown Test: A "health checkup" for your engine's internal seals.
our controls are your primary connection to the machine. If you’re fighting your bike’s ergonomics, you’re wasting energy. Whether you need more leverage for the dirt or more comfort for the highway, we can dial in your setup.
Handlebar Swaps & Risers: Replace bend-prone factory bars with high-strength alloy bars (like ProTaper or Renthal) or add risers to achieve a more upright, natural standing position for off-road riding.
Hand Guard Installation: From lightweight wind deflectors to full-wrap "barkbusters" that protect your levers and knuckles from impacts and brush.
Integrated Heated Grips: Professional wiring of thermostatically controlled grips to extend your riding season into the colder months without bulky gloves.
Throttle Assist & Cruise Control: Installation of mechanical throttle locks to reduce wrist fatigue on long pavement transfers.
A properly fitted handlebar doesn't just feel better; it reduces vibration and prevents "arm pump" and numbness. We don't just bolt parts on—we adjust lever angles, cable routing, and bar sweep to match your specific wingspan and riding style.
A chain is only as good as the sprockets it's riding on. We handle the dirty work of keeping your power delivery system silent and efficient.
Full Chain & Sprocket Replacement: Professional installation of matched sets to ensure even wear and maximum life.
Belt Drive Tensioning (Cruisers): Using sonic or mechanical tension tools to prevent belt squeal and premature snapping.
Shaft Drive Service: Draining the pumpkin (rear gear case), inspecting the splines, and applying fresh molybdenum grease to prevent driveshaft failure.
Your suspension is what keeps your tires in contact with the ground. If your bike feels "mushy," "harsh," or you see oil on your fork tubes, it's time for a refresh.
Fork Seal & Oil Replacement: We pull the forks, replace leaking seals, and refill with high-performance fork oil to restore damping.
Sag & Preload Adjustment: We set your bike's suspension specifically for your body weight and riding style.
Chassis Pivot Service: Deep cleaning and high-pressure greasing of the swingarm and suspension linkage pivots for smooth, predictable handling.
Clean fluids are the lifeblood of your machine. This service goes beyond a simple oil change to ensure every hydraulic and mechanical system on your bike is performing at its peak.
Engine Oil & Filter: Premium synthetic or blend options with high-efficiency filters for maximum protection.
Brake Fluid Flush: We drain and replace old, moisture-contaminated fluid with fresh DOT 4/5.1 to restore firm lever feel and prevent ABS pump failure.
Transmission & Primary: specialized lubricants to ensure smooth shifting and clutch engagement.
Final Drive: Fresh gear oil for shaft-driven bikes to prevent heat buildup and premature wear.
Hydraulic Clutch Flush: (If applicable) Ensures consistent pull and prevents slave cylinder corrosion.
Modern motorcycles are rolling computers. From failing charging systems to "ghost" parasitic draws, electrical issues can be the most frustrating part of ownership. We provide expert-level diagnostics and repair to ensure your bike starts every time and your accessories run safely.
Stator & Regulator/Rectifier Testing: We test the health of your charging circuit to ensure your battery is actually receiving the power it needs while riding.
Battery Load Testing & Terminal Cleaning: More than just a voltage check; we ensure your battery can handle the high-amperage "crank" required for cold starts.
Parasitic Draw Trace: If your battery dies after sitting for three days, we find the "leak" and fix it.
LED Upgrades & Bulb Replacement: Improve your nighttime visibility with high-output LED conversions for headlamps, signals, and brake lights.
Signal & Horn Repair: Fixing intermittent switches, blown fuses, or frayed wiring looms to keep you street-legal and safe.
Accessory Installation: Professional, fused installation of Heated Grips, GPS units, USB chargers, and Auxiliary Lighting—no "bird's nest" wiring allowed.
Harness Repair: Expert soldering and heat-shrinking for damaged or corroded wiring sections.
Grounding Point Refresh: Cleaning the main frame grounds to resolve "ghost" flickering or ECU errors.
Electrical work requires patience and precision. We don't just "guess and check" with your wallet; we use professional multimeters and diagnostic tools to find the root cause of the failure before replacing any parts.
Finally, a shirt that looks better than your garage floor. Whether you’re out carving corners in Western NC or just staring at your bike in the driveway, this Mays Motorcycle Maintenance tee is the perfect fit. We promise it’s been 'vetted' by a mechanic—which means it’s durable enough to handle a stray oil splash but soft enough to wear on a 300-mile Sunday ride. No technical manual required to put it on.
No results match your search. Try removing a few filters.
Interested in working together? Fill out some info and we will be in touch shortly. We can’t wait to hear from you!
